Linux cpanel2.daytoncreative.net 2.6.32-754.29.2.el6.x86_64 #1 SMP Tue May 12 17:39:04 UTC 2020 x86_64
Apache/2.4.43 (cPanel) OpenSSL/1.1.1g mod_bwlimited/1.4
Server IP : 70.62.220.67 & Your IP : 216.73.216.193
Domains :
Cant Read [ /etc/named.conf ]
User : michaelgreg
Terminal
Auto Root
Create File
Create Folder
Localroot Suggester
Backdoor Destroyer
Readme
/
var /
log /
perl-5.20.2 /
Cross /
Delete
Unzip
Name
Size
Permission
Date
Action
Makefile
2.03
KB
-r--r--r--
2014-12-27 11:48
Makefile-cross-SH
40.04
KB
-r--r--r--
2014-12-27 11:49
Makefile.SH.patch
6.52
KB
-r--r--r--
2014-12-27 11:48
README
2.74
KB
-r--r--r--
2014-12-27 11:48
README.new
2.8
KB
-r--r--r--
2014-12-27 11:48
TODO
63
B
-r--r--r--
2014-12-27 11:48
build-arm-n770-sh
2.34
KB
-r--r--r--
2014-12-27 11:48
cflags-cross-arm
3.32
KB
-r--r--r--
2014-12-27 11:49
config
494
B
-r--r--r--
2014-12-27 11:48
config.sh-arm-linux
25.47
KB
-r--r--r--
2015-01-28 21:08
config.sh-arm-linux-n770
24.6
KB
-r--r--r--
2015-01-28 21:08
generate_config_sh
3.66
KB
-r-xr-xr-x
2014-12-27 11:48
installperl.patch
538
B
-r--r--r--
2014-12-27 11:48
warp
376
B
-r-xr-xr-x
2014-12-27 11:48
Save
Rename
#! /bin/sh # This file is used to create generic Makefile for cross-compile # (borrowed from Makefile.SH) # (now only small changes are done to establish cross-compilation) # miniperl removed from here, as this is built on HOST Makefile=Makefile-cross-$CROSS_NAME . Cross/config-${CROSS_NAME}.sh # H.Merijn Brand [17 Feb 2004] # This comment is just to ensure that Configure will find variables that # are removed/replaced in patches on blead, but are still needed in the # 5.8.x, 5.6.x and 5.005.x maintenance tracks. # metaconfig -m will scan all .SH files on this level (not deeper), and # not in x2p and other subfolders. This file is as good as any .SH # patch references # #22227 $baserev # #22302 $yacc $byacc # H.Merijn Brand [30 Oct 2004] # Mentioned for the same reason for future reference # #23434 $d_strlcat $d_strlcpy : This forces SH files to create target in same directory as SH file. : This is so that make depend always knows where to find SH derivatives. case "$0" in */*) cd `expr X$0 : 'X\(.*\)/'` ;; esac linklibperl='$(LIBPERL)' shrpldflags='$(LDDLFLAGS)' ldlibpth='' DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' case "$useshrplib" in true) # Prefix all runs of 'miniperl' and 'perl' with # $ldlibpth so that ./perl finds *this* shared libperl. case "$LD_LIBRARY_PATH" in '') ldlibpth="LD_LIBRARY_PATH=`pwd`";; *) ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; esac pldlflags="$cccdlflags" static_ldflags='' case "${osname}${osvers}" in next4*) ld=libtool lddlflags="-dynamic -undefined warning -framework System \ -compatibility_version 1 -current_version $patchlevel \ -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" ;; darwin*) shrpldflags="${ldflags} -dynamiclib \ -compatibility_version \ ${api_revision}.${api_version}.${api_subversion} \ -current_version \ ${revision}.${patchlevel}.${subversion} \ -install_name \$(shrpdir)/\$@" ;; cygwin*) linklibperl="-lperl" ;; sunos*) linklibperl="-lperl" ;; netbsd*|freebsd[234]*|openbsd*|dragonfly*|bitrig*) linklibperl="-L. -lperl" ;; interix*) linklibperl="-L. -lperl" shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" ;; linux*) shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" ;; aix*) shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" case "$osvers" in 3*) shrpldflags="$shrpldflags -e _nostart" ;; *) shrpldflags="$shrpldflags -b noentry" ;; esac shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" ;; hpux*) linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" ;; os390*) shrpldflags='-W l,XPLINK,dll' linklibperl='libperl.x' DPERL_EXTERNAL_GLOB='' ;; esac case "$ldlibpthname" in '') ;; *) case "$osname" in os2) ldlibpth='' ;; *) eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" ;; esac # Strip off any trailing :'s ldlibpth=`echo $ldlibpth | sed 's/:*$//'` ;; esac case "$ldlibpth" in # Protect any spaces *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; esac case "$osname" in linux) # If there is a pre-existing $libperl from a previous # installation, Linux needs to use LD_PRELOAD to # override the LD_LIBRARY_PATH setting. See the # INSTALL file, under "Building a shared perl library". # If there is no pre-existing $libperl, we don't need # to do anything further. if test -f $archlib/CORE/$libperl; then rm -f preload cat <<'EOT' > preload #! /bin/sh lib=$1 shift test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" exec "$@" EOT chmod 755 preload ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" fi ;; os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" ;; esac ;; *) pldlflags='' static_ldflags='CCCDLFLAGS=' ;; esac : Prepare dependency lists for Makefile. dynamic_list=' ' extra_dep='' for f in $dynamic_ext; do : the dependency named here will never exist base=`echo "$f" | sed 's/.*\///'` this_target="lib/auto/$f/$base.$dlext" dynamic_list="$dynamic_list $this_target" : Parallel makes reveal that we have some interdependencies case $f in Math/BigInt/FastCalc) extra_dep="$extra_dep $this_target: lib/auto/List/Util/Util.$dlext" ;; Unicode/Normalize) extra_dep="$extra_dep $this_target: uni.data" ;; esac done static_list=' ' for f in $static_ext; do base=`echo "$f" | sed 's/.*\///'` static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" done nonxs_list=' ' for f in $nonxs_ext; do base=`echo "$f" | sed 's/.*\///'` nonxs_list="$nonxs_list ext/$f/pm_to_blib" done echo "Extracting $Makefile (with variable substitutions)" $spitshell >$Makefile <<!GROK!THIS! # $Makefile.SH # This file is derived from $Makefile.SH. Any changes made here will # be lost the next time you run Configure. # $Makefile is used to generate $firstmakefile. The only difference # is that $firstmakefile has the dependencies filled in at the end. CC = $cc LD = $ld LDFLAGS = $ldflags CLDFLAGS = $ldflags mallocsrc = $mallocsrc mallocobj = $mallocobj madlysrc = $madlysrc madlyobj = $madlyobj LNS = $lns # NOTE: some systems don't grok "cp -f". XXX Configure test needed? CPS = $cp RMS = rm -f ranlib = $ranlib # The following are mentioned only to make metaconfig include the # appropriate questions in Configure. If you want to change these, # edit config.sh instead, or specify --man1dir=/wherever on # installman commandline. bin = $installbin scriptdir = $scriptdir shrpdir = $archlibexp/CORE privlib = $installprivlib man1dir = $man1dir man1ext = $man1ext man3dir = $man3dir man3ext = $man3ext # The following are used to build and install shared libraries for # dynamic loading. LDDLFLAGS = $lddlflags SHRPLDFLAGS = $shrpldflags CCDLFLAGS = $ccdlflags DLSUFFIX = .$dlext PLDLFLAGS = $pldlflags LIBPERL = $libperl LLIBPERL= $linklibperl SHRPENV = $shrpenv # Static targets are ordinarily built without CCCDLFLAGS. However, # if building a shared libperl.so that might later be linked into # another application, then it might be appropriate to also build static # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC # for GNU cc). STATIC_LDFLAGS = $static_ldflags # The following is used to include the current directory in # the dynamic loader path you are building a shared libperl. LDLIBPTH = $ldlibpth dynamic_ext = $dynamic_list static_ext = $static_list nonxs_ext = $nonxs_list ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) DYNALOADER = DynaLoader\$(OBJ_EXT) libs = $perllibs $cryptlib public = perl\$(EXE_EXT) utilities translators shellflags = $shellflags # This is set to MAKE=$make if your $make command doesn't # do it for you. $make_set_make # Mention $gmake here so it gets probed for by Configure. # These variables may need to be manually set for non-Unix systems. AR = $full_ar EXE_EXT = $_exe LIB_EXT = $_a OBJ_EXT = $_o PATH_SEP = $p_ # If you're going to use valgrind and it can't be invoked as plain valgrind # then you'll need to change this, or override it on the make command line. VALGRIND=valgrind FIRSTMAKEFILE = $firstmakefile # Any special object files needed by this architecture, e.g. os2/os2.obj ARCHOBJS = $archobjs .SUFFIXES: .c \$(OBJ_EXT) .i .s # grrr SHELL = $sh # how to tr(anslate) newlines TRNL = '$trnl' OPTIMIZE = $optimize EXTRAS = $extras INSTALLPREFIXEXP = $prefix !GROK!THIS! # not used by Makefile but by installperl; # mentioned here so that metaconfig picks these up # $installusrbinperl # $versiononly case "${osname}:${osvers}" in darwin:*) $spitshell >>$Makefile <<EOF # Your locales are broken (osname $osname, osvers $osvers) # and to avoid the numerous # perl: warning: Setting locale failed. # warnings during the build process we reset the locale variables. LC_ALL=C LANG=C LANGUAGE=C EOF ;; esac $spitshell >>$Makefile <<!GROK!THIS! CROSS_NAME = ${CROSS_NAME} CROSS_LIB = xlib/${CROSS_NAME} CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\` CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\` !GROK!THIS! ## In the following dollars and backticks do not need the extra backslash. $spitshell >>$Makefile <<'!NO!SUBS!' CONFIGPM = xlib/$(CROSS_NAME)/Config.pm private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod lib/buildcustomize.pl shextract = Makefile cflags config.h makedepend \ makedir myconfig writemain pod/Makefile addedbyconf = UU $(shextract) lib/lib.pm pstruct # Unicode data files generated by mktables unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \ lib/unicore/CombiningClass.pl lib/unicore/Name.pl \ lib/unicore/UCD.pl lib/unicore/Name.pm \ lib/unicore/Heavy.pl lib/unicore/mktables.lst # Directories of Unicode data files generated by mktables unidatadirs = lib/unicore/To lib/unicore/lib h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h h2 = embed.h form.h gv.h handy.h hv.h hv_func.h keywords.h mg.h op.h opcode.h h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h h5 = utf8.h warnings.h h = $(h1) $(h2) $(h3) $(h4) $(h5) c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c c5 = $(madlysrc) $(mallocsrc) c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) lintflags = \ -b \ -n \ -p \ -Ncheck=%all \ -Nlevel=4 \ -errchk=parentheses \ -errhdr=%all \ -errfmt=src \ -errtags \ -erroff=E_ASSIGN_NARROW_CONV \ -erroff=E_BAD_PTR_CAST \ -erroff=E_BAD_PTR_CAST_ALIGN \ -erroff=E_BAD_PTR_INT_COMBINATION \ -erroff=E_BAD_SIGN_EXTEND \ -erroff=E_BLOCK_DECL_UNUSED \ -erroff=E_CASE_FALLTHRU \ -erroff=E_CONST_EXPR \ -erroff=E_CONSTANT_CONDITION \ -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ -erroff=E_EQUALITY_NOT_ASSIGNMENT \ -erroff=E_EXPR_NULL_EFFECT \ -erroff=E_FALSE_LOGICAL_EXPR \ -erroff=E_INCL_NUSD \ -erroff=E_LOOP_EMPTY \ -erroff=E_MAIN_PARAM \ -erroff=E_POINTER_TO_OBJECT \ -erroff=E_PTRDIFF_OVERFLOW \ -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ -erroff=E_STATIC_UNUSED \ -erroff=E_TRUE_LOGICAL_EXPR splintflags = \ -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ -D__builtin_va_list=va_list \ -Dsigjmp_buf=jmp_buf \ -warnposix \ \ +boolint \ +charintliteral \ -fixedformalarray \ -mustfreefresh \ -nestedextern \ -predboolint \ -predboolothers \ -preproc \ -boolops \ -shadow \ -nullstate \ +longintegral \ +matchanyintegral \ -type \ \ +line-len 999 \ +weak splintfiles = $(c1) .c$(OBJ_EXT): $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c .c.i: $(CCCMDSRC) -E $*.c > $*.i .c.s: $(CCCMDSRC) -S $*.c all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make @echo " "; @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." .PHONY: all # This is now done by installman only if you actually want the man pages. # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; # Phony target to force checking subdirectories. # Apparently some makes require an action for the FORCE target. .PHONY: FORCE FORCE: @sh -c true !NO!SUBS! $spitshell >>$Makefile <<!GROK!THIS! # We do a copy of the op.c instead of a symlink because gcc gets huffy # if we have a symlink forest to another disk (it complains about too many # levels of symbolic links, even if we have only two) opmini.c: op.c \$(RMS) opmini.c \$(CPS) op.c opmini.c opmini\$(OBJ_EXT): opmini.c \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c globals\$(OBJ_EXT): !GROK!THIS! $spitshell >>$Makefile <<'!NO!SUBS!' miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h $(CCCMD) $(PLDLFLAGS) $*.c perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) sh writemain $(DYNALOADER) $(static_ext) > perlmain.c !NO!SUBS! case "$osname" in cygwin) ;; # Let cygwin/Makefile.SHs do its work. *) $spitshell >>$Makefile <<'!NO!SUBS!' perlmain$(OBJ_EXT): perlmain.c $(CCCMD) $(PLDLFLAGS) $*.c !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' # The file ext.libs is a list of libraries that must be linked in # for static extensions, e.g. -lm -lgdbm, etc. The individual # static extension Makefile's add to it. ext.libs: $(static_ext) -@test -f ext.libs || touch ext.libs !NO!SUBS! # How to build libperl. This is still rather convoluted. # Load up custom Makefile.SH fragment for shared loading and executables: case "$osname" in *) Makefile_s="$osname/Makefile.SHs" ;; esac case "$osname" in aix) $spitshell >>$Makefile <<!GROK!THIS! LIBS = $perllibs # In AIX we need to change this for building Perl itself from # its earlier definition (which is for building external # extensions *after* Perl has been built and installed) CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` !GROK!THIS! case "$useshrplib" in define|true|[yY]*) $spitshell >>$Makefile <<'!NO!SUBS!' LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) $(LIBPERL_NONSHR): $(obj) $(RMS) $(LIBPERL_NONSHR) $(AR) rcu $(LIBPERL_NONSHR) $(obj) $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) MINIPERLEXP = $(MINIPERL_NONSHR) LIBPERLEXPORT = perl.exp !NO!SUBS! ;; *) $spitshell >>$Makefile <<'!NO!SUBS!' MINIPERLEXP = miniperl$(EXE_EXT) PERLEXPORT = perl.exp !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp !NO!SUBS! ;; os2) $spitshell >>$Makefile <<'!NO!SUBS!' MINIPERLEXP = miniperl perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def !NO!SUBS! ;; esac if test -r $Makefile_s ; then . $Makefile_s $spitshell >>$Makefile <<!GROK!THIS! $Makefile: $Makefile_s !GROK!THIS! else $spitshell >>$Makefile <<'!NO!SUBS!' $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) !NO!SUBS! case "$useshrplib" in true) $spitshell >>$Makefile <<'!NO!SUBS!' rm -f $@ $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) !NO!SUBS! case "$osname" in aix) $spitshell >>$Makefile <<'!NO!SUBS!' rm -f libperl$(OBJ_EXT) mv $@ libperl$(OBJ_EXT) $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) !NO!SUBS! ;; esac ;; *) $spitshell >>$Makefile <<'!NO!SUBS!' rm -f $(LIBPERL) $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) @$(ranlib) $(LIBPERL) !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' # How to build executables. # The $& notation tells Sequent machines that it can do a parallel make, # and is harmless otherwise. # The miniperl -w -MExporter line is a basic cheap test to catch errors # before make goes on to run preplibrary and then MakeMaker on extensions. # This is very handy because later errors are often caused by miniperl # build problems but that's not obvious to the novice. # The Module used here must not depend on Config or any extensions. !NO!SUBS! $spitshell >>$Makefile <<'!NO!SUBS!' perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) -@rm -f miniperl.xok $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) # Purify/Quantify Perls. pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) # Valgrind perl (currently Linux only) perl.valgrind.config: config.sh @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." @$(MAKE) perl.config.dashg @echo "Checking usemymalloc='n' in config.sh..." @grep "^usemymalloc=" config.sh @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 @echo "And of course you have to have valgrind..." $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 # Third Degree Perl (Tru64 only) perl.config.dashg: @echo "Checking optimize='-g' in config.sh..." @grep "^optimize=" config.sh @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 perl.third.config: config.sh @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." @$(MAKE) perl.config.dashg @echo "Checking usemymalloc='n' in config.sh..." @grep "^usemymalloc=" config.sh @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 perl.third: /usr/bin/atom perl.third.config perl atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl @echo "Now you may run perl.third and then study perl.3log." # Pixie Perls (Tru64 and IRIX only) perl.pixie.config: config.sh @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." @$(MAKE) perl.config.dashg perl.pixie.atom: /usr/bin/atom perl atom -tool pixie -L. -all -toolargs="-quiet" perl perl.pixie.irix: perl pixie perl perl.pixie: /usr/bin/pixie perl.pixie.config perl if test -x /usr/bin/atom; then \ $(MAKE) perl.pixie.atom; \ else \ $(MAKE) perl.pixie.irix; \ fi @echo "Now you may run perl.pixie and then run pixie." # Gprof Perl perl.config.dashpg: @echo "Checking optimize='-pg' in config.sh..." @grep "^optimize=" config.sh @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 perl.gprof.config: config.sh @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." @$(MAKE) perl.config.dashpg perl.gprof: /usr/bin/gprof perl.gprof.config @-rm -f perl $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl @echo "Now you may run perl.gprof and then run gprof perl.gprof." # Gcov Perl perl.config.gcov: @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." @echo "Checking gccversion in config.sh..." @grep "^gccversion=" config.sh @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." @grep "^ccflags=" config.sh @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 perl.gcov: perl.config.gcov @-rm -f perl $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl @echo "Now you may run perl.gcov and then run gcov some.c." # Microperl. This is just a convenience thing if one happens to # build also the full Perl and therefore the real big Makefile: # usually one should manually explicitly issue the below command. .PHONY: microperl microperl: $(MAKE) -f Makefile.micro !NO!SUBS! fi $spitshell >>$Makefile <<'!NO!SUBS!' .PHONY: preplibrary preplibrary: miniperl $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL) .PHONY: makeppport makeppport: miniperl$(EXE_EXT) $(CONFIGPM) $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME) cp *.h $(CROSS_LIB)/ cp ext/re/re.pm $(LIBDIR)/ $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h lib/re.pm: ext/re/re.pm @-rm -f $@ cp ext/re/re.pm lib/re.pm lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl unidatafiles $(unidatafiles): uni.data uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -P ../../pod -maketest -makelist -p # Commented out so always runs, mktables looks at far more files than we # can in this makefile to decide if needs to run or not # touch uni.data extra.pods: miniperl -@test ! -f extra.pods || rm -f `cat extra.pods` -@rm -f extra.pods -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ nx=`echo $$x | sed -e "s/README\.//"`; \ cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \ echo "pod/perl"$$nx".pod" >> extra.pods ; \ done -@rm -f pod/perlvms.pod -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods -@rm -f pod/perldelta.pod -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc extras.make: perl$(EXE_EXT) -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` extras.test: perl$(EXE_EXT) -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` extras.install: perl$(EXE_EXT) -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` .PHONY: install install-strip install-all install-verbose install-silent \ no-install install.perl install.man install.html META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -y META.json: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -j install-strip: $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" install install-all: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" install-verbose: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" install-silent: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" no-install: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" # Set this to an empty string to avoid an attempt of rebuild before install INSTALL_DEPENDENCE = all install.perl: $(INSTALL_DEPENDENCE) installperl $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) -@test ! -s extras.lst || $(MAKE) extras.install install.man: all installman $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) # XXX Experimental. Hardwired values, but useful for testing. # Eventually Configure could ask for some of these values. install.html: all installhtml -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. $(LDLIBPTH) ./perl installhtml \ --podroot=. --podpath=. --recurse \ --htmldir=$(privlib)/html \ --htmlroot=$(privlib)/html \ --splithead=pod/perlipc \ --splititem=pod/perlfunc \ --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \ --verbose # I now supply perly.c with the kits, so the following section is # used only if you force bison to run by saying # make regen_perly # You normally shouldn't remake perly.[ch]. .PHONY: regen_perly run_byacc: @echo "run_byacc is obsolete; try 'make regen_perly' instead" # this outputs perly.h, perly.act and perly.tab regen_perly: perl regen_perly.pl # We don't want to regenerate perly.c and perly.h, but they might # appear out-of-date after a patch is applied or a new distribution is # made. perly.c: perly.y -@sh -c true perly.h: perly.y -@sh -c true SYM = globvar.sym perlio.sym SYMH = perlvars.h intrpvar.h CHMOD_W = chmod +w # The following files are generated automatically # embed.pl: proto.h embed.h embedvar.h perlapi.h perlapi.c # opcode.pl: opcode.h opnames.h pp_proto.h # regcomp.pl: regnodes.h # warnings.pl: warnings.h lib/warnings.pm # feature.pl: feature.h lib/feature.pl # The correct versions should be already supplied with the perl kit, # in case you don't have perl available. # To force them to be regenerated, run # perl regen.pl # with your existing copy of perl # (make regen_headers is kept for backwards compatibility) AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h embed.h embedvar.h \ perlapi.h perlapi.c regnodes.h warnings.h lib/warnings.pm \ lib/feature.pm feature.h .PHONY: regen_headers regen_all regen regen_headers: FORCE -perl regen.pl regen_all: regen .PHONY: manisort manicheck manisort: FORCE LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ LC_ALL=C sort -fdo MANIFEST MANIFEST) manicheck: FORCE perl Porting/manicheck # Extensions: # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will # automatically get built. There should ordinarily be no need to change # any of this part of makefile. # # The dummy dependency is a place holder in case $(dynamic_ext) or # $(static_ext) is empty. # # DynaLoader may be needed for extensions that use Makefile.PL. ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM) ### if not exist $(AUTODIR) mkdir $(AUTODIR) ### cd $(EXTDIR)\$(*B) ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL ### cd ..\..\win32 ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) ### cd $(EXTDIR)\$(*B) ### $(XSUBPP) dl_win32.xs > $(*B).c ### cd ..\..\win32 ### ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs $(DYNALOADER): lib/buildcustomize.pl preplibrary FORCE @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) d_dummy $(dynamic_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic s_dummy $(static_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) n_dummy $(nonxs_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary $(DYNALOADER) FORCE @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) !NO!SUBS! $spitshell >>$Makefile <<EOF $extra_dep EOF $spitshell >>$Makefile <<'!NO!SUBS!' .PHONY: printconfig printconfig: @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ realclean _realcleaner clobber _clobber \ distclean veryclean _verycleaner clean: _tidy _mopup realclean: _realcleaner _mopup @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" _clobber: -@rm -f Cross/run-* Cross/to-* Cross/from-* rm -f config.sh cppstdin Policy.sh extras.lst clobber: _realcleaner _mopup _clobber distclean: clobber # Like distclean but also removes emacs backups and *.orig. veryclean: _verycleaner _mopup _clobber -@rm -f Obsolete Wanted # Do not 'make _mopup' directly. _mopup: rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT) -rmdir .depending -@test -f extra.pods && rm -f `cat extra.pods` -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod -rm -f perl.exp ext.libs extra.pods uni.data opmini.o -rm -f perl.export perl.dll perl.libexp perl.map perl.def -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump -rm -f perl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl -rm -f config.over # Do not 'make _tidy' directly. _tidy: -cd pod; $(LDLIBPTH) $(MAKE) clean -cd utils; $(LDLIBPTH) $(MAKE) clean -cd x2p; $(LDLIBPTH) $(MAKE) clean -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \ done _cleaner1: -cd os2; rm -f Makefile -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) -@if test -f miniperl$(EXE_EXT) ; then \ for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \ done ; \ else \ sh $(CLEAN).sh ; \ fi rm -f realclean.sh veryclean.sh -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean # Some systems do not support "?", so keep these files separate. _cleaner2: -rm -f core.*perl.*.? t/core.perl.*.? .?*.c rm -f core *perl.core t/core t/*perl.core core.* t/core.* rm -f t/perl$(EXE_EXT) t/rantests rm -rf t/tmp* rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) rm -rf $(addedbyconf) rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old rm -f $(private) rm -rf $(unidatafiles) $(unidatadirs) rm -rf lib/auto rm -f lib/.exists lib/*/.exists lib/*/*/.exists rm -f h2ph.man pstruct rm -rf .config rm -f preload rm -rf lib/Encode lib/Compress lib/Hash lib/re rm -rf lib/IO/Compress lib/IO/Uncompress rm -f lib/ExtUtils/ParseXS/t/XSTest.c rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) -rmdir lib/B lib/Data -rmdir lib/Filter/Util lib/IO/Socket -rmdir lib/List lib/MIME lib/Scalar lib/Sys -rmdir lib/threads lib/XS _realcleaner: @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean @$(LDLIBPTH) $(MAKE) _cleaner2 _verycleaner: @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean @$(LDLIBPTH) $(MAKE) _cleaner2 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig .PHONY: lint lint: $(c) rm -f *.ln lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) .PHONY: splint splint: $(c) splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) # Need to unset during recursion to go out of loop. # The README below ensures that the dependency list is never empty and # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. MAKEDEPEND = Makefile makedepend $(FIRSTMAKEFILE): README $(MAKEDEPEND) $(MAKE) depend MAKEDEPEND= config.h: config_h.SH config.sh $(SHELL) config_h.SH # TODO - improve following line cp config.h $(CROSS_LIB)/ xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h" cp xconfig.h $(CROSS_LIB)/ cp xconfig.h $(CROSS_LIB)/config.h # When done, touch perlmain.c so that it doesn't get remade each time. .PHONY: depend depend: makedepend sh ./makedepend MAKE=$(MAKE) - test -s perlmain.c && touch perlmain.c cd x2p; $(MAKE) depend # Cannot postpone this until $firstmakefile is ready ;-) makedepend: makedepend.SH config.sh sh ./makedepend.SH .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ test_tty test-tty _test_tty test_notty test-notty _test_notty \ utest ucheck test.utf8 check.utf8 test.torture torturetest \ test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ test.third check.third utest.third ucheck.third test_notty.third \ test.deparse test_notty.deparse test_harness test_harness_notty \ minitest coretest test.taintwarn # Cannot delegate rebuilding of t/perl to make # to allow interlaced test and minitest TESTFILE=TEST _test_prep: cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT)) # Architecture-neutral stuff: test_prep_pre: preplibrary utilities $(nonxs_ext) test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) \ $(dynamic_ext) $(TEST_PERL_DLL) x2p/s2p x2p/find2perl PERL=./perl $(MAKE) _test_prep _test_tty: cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty _test_notty: cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) # The second branch is for testing without a tty or controlling terminal, # see t/op/stat.t _test: if (true </dev/tty) >/dev/null 2>&1; then \ $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \ else \ $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \ fi @echo "Ran tests" > t/rantests test check: test_prep PERL=./perl $(MAKE) _test test_tty: test_prep PERL=./perl $(MAKE) _test_tty test_notty: test_prep PERL=./perl $(MAKE) _test_notty utest ucheck test.utf8 check.utf8: test_prep PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test coretest: test_prep PERL=./perl TEST_ARGS=-core $(MAKE) _test test-prep: test_prep test-tty: test_tty test-notty: test_notty # Torture testing test.torture torturetest: test_prep PERL=./perl TEST_ARGS=-torture $(MAKE) _test # Targets for UTF16 testing: minitest.utf16: minitest.prep - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ && $(LDLIBPTH) ./perl TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty test.utf16 check.utf16: test_prep PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test utest.utf16 ucheck.utf16: test_prep PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test # Targets for valgrind testing: test_prep.valgrind: test_prep perl.valgrind PERL=./perl $(MAKE) _test_prep test.valgrind check.valgrind: test_prep perl.valgrind.config PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test test_notty.valgrind: test_prep.valgrind perl.valgrind.config PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty # Targets for Third Degree testing. test_prep.third: test_prep perl.third PERL=./perl.third $(MAKE) _test_prep test.third check.third: test_prep.third perl.third PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test utest.third ucheck.third: test_prep.third perl.third PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test test_notty.third: test_prep.third perl.third PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty # Targets for Deparse testing. test.deparse: test_prep PERL=./perl TEST_ARGS=-deparse $(MAKE) _test test_notty.deparse: test_prep PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty # Targets to run the test suite with -t test.taintwarn: test_prep PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test minitest.prep: -@test -f lib/lib.pm && test -f lib/Config.pm || \ $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles) @echo " " @echo "You may see some irrelevant test failures if you have been unable" @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files." @echo " " # Can't depend on lib/Config.pm because that might be where miniperl # is crashing. minitest: miniperl$(EXE_EXT) minitest.prep - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty # Test via harness test_harness: test_prep PERL=./perl $(MAKE) TESTFILE=harness _test test_harness_notty: test_prep PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test # Handy way to run perlbug -ok without having to install and run the # installed perlbug. We don't re-run the tests here - we trust the user. # Please *don't* use this unless all tests pass. # If you want to report test failures, use "make nok" instead. .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack ok: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' okfile: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok oknack: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A okfilenack: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A nok: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' nokfile: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok noknack: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A nokfilenack: utilities $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A .PHONY: clist hlist shlist clist: $(c) echo $(c) | tr ' ' $(TRNL) >.clist hlist: $(h) echo $(h) | tr ' ' $(TRNL) >.hlist shlist: $(sh) echo $(sh) | tr ' ' $(TRNL) >.shlist Makefile: Makefile.SH ./config.sh $(SHELL) Makefile.SH .PHONY: distcheck distcheck: FORCE perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' .PHONY: elc elc: emacs/cperl-mode.elc emacs/cperl-mode.elc: emacs/cperl-mode.el -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el .PHONY: etags ctags tags etags: TAGS TAGS: emacs/cperl-mode.elc sh emacs/ptags # Let's hope make will not go into an infinite loop on case-insensitive systems # This may also fail if . is in the head of the path, since perl will # require -Ilib tags: TAGS perl emacs/e2ctags.pl TAGS > tags ctags: ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE # If this runs make out of memory, delete /usr/include lines. !NO!SUBS! $eunicefix $Makefile $rm -f $firstmakefile # Now do any special processing required before building. case "$ebcdic" in define) xxx='' echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 case "$osname" in os390|posix-bc) if cd x2p then rm -f y.tab.c y.tab.h case "$osname" in posix-bc) # we are using two different yaccs in BS2000 Posix! byacc a2p.y >/dev/null 2>&1 ;; *) # e.g. os390 yacc a2p.y >/dev/null 2>&1 ;; esac if cmp -s y.tab.c a2p.c then rm -f y.tab.c else echo "a2p.y -> a2p.c" >&2 mv -f y.tab.c a2p.c chmod u+w a2p.c sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c xxx="$xxx a2p.c" fi # In case somebody yacc -d:ed the a2p.y. if test -f y.tab.h then if cmp -s y.tab.h a2p.h then rm -f y.tab.h else echo "a2p.h -> a2p.h" >&2 mv -f y.tab.h a2p.h xxx="$xxx a2p.h" fi fi cd .. fi ;; *) echo "'$osname' is an EBCDIC system I don't know that well." >&4 ;; esac case "$xxx" in '') echo "No parser files were regenerated. That's okay." >&2 ;; esac ;; esac # ex: set ts=8 sts=4 sw=4 noet: